Category Archives: Misc Projects

Connecting a Weather Station to the Internet

I’ve been pretty terrible in the last couple of years getting things documented on here that I’d intended to get documented on here. I’m going to slowly back-fill the site with info on projects that may be of broader interest.  These include the actual building and finishing of the arcade cabinet, some major home remodeling, custom home automation software and hardware, and a slew of other projects. I need to get back into the habit of actually posting these, not just taking photos for them.

The smallest and most recent, and thus easiest, to post is a quick project for getting my Accurite 02064 5-in-1 Weather Station online.

Continue reading Connecting a Weather Station to the Internet

Mocked Up Cabinet with Control Panel Art

I’ve waffled a bit on the control panel art, trying to decide if it was a little “much”. After all, one of my design goals was to be relatively conservative. That’s why I’m going to be staining the cabinet to match the rest of the furniture I have in that room, and keeping it largely toned down.

I wanted to get a rough sense of what the art would look like on the cabinet, so I fired up Gimp and did some cutting and pasting and perspective skewing. Through the magic of layers and editing, I got a reasonable result, I think.

Continue reading Mocked Up Cabinet with Control Panel Art

First Pics of the Cabinet Parts

Just a quick post — I got a photo today of the cabinet parts. Its just one quick photo, but it appears to be some of the MDF pieces. The top, and control panels are MDF, the rest are Baltic Birch plywood.

The first shot of some of the freshly CNC cut parts of the cabinet. These appear to be the MDF parts.
The first shot of some of the freshly CNC cut parts of the cabinet. These appear to be the MDF parts.


Waiting on the Cabinet

I got word today that the CNC cutting of the cabinet was finished yesterday and the parts were picked up today. There’s still some work that Haruman has to do this weekend, but the word is that I ought to have it on its way here next week!

In the mean time I’ve been, while doing things like working on the Cupcade, getting the rest of the bits and pieces here. In the last week, the T-molding for the top of the table arrived, as did the 1/4″ glass for the top.

I also spent a good bit of time over the weekend working on designs for the control panel overlays. These are the graphics that get printed onto the control panel surface, both to indicate button use and to jazz them up.

Continue reading Waiting on the Cabinet

Assembling the Cupcade

WP_20140819_17_36_09_ProLast night the bits and pieces showed up from Adafruit for the Cupcade, so I sat down and started assembling it. Its not particularly complicated to put together and its VERY well documented on their website, but there’s a lot of fiddly soldering, made trickier by my not being able to find my low-power iron and having to use a way-too-beefy 40 watt one.

But first things first, its important to set up a good work area.

Continue reading Assembling the Cupcade

Mini-Project… or mini-cabinet!

Its taking some time to get the final CNC details back from Haruman’s Customs, which has left the arcade cabinet project in a bit of limbo. On a bit of a whim, I decided to order a Adafruit Cupcade micro-arcade-cabinet. Think full-blown arcade cabinet running MAME on  Raspberry Pi, with a joystick, buttons and a 2.8″ screen!

Although not even remotely as complicated to set up as the big cocktail cabinet, there looks to be quite a bit of work involved in building it. I’m also going to do it up with paint and custom artwork. I’ve been fiddling with some, which I show down below, but I think my super-talented friend Jacob is going to whip something up even more totally-awesome (and less cut-n-paste) for me!

Continue reading Mini-Project… or mini-cabinet!